Yaris Hilton - What went wrong? (Engine Inspection)

19 feb 2020
919 919 Skatījumi

After blowing our eBay boosted wrecker Corolla engine, we bring Yaris Hilton back to the shed to try and work out what's wrong with it and what we should do next.
Be sure to check out the MCM Facebook Page and Shop
►facebook.com/mightycarmods
►www.mightycarmods.com/collecti...
✌️ JDM Air Fresheners mightycarmods.com/collections...
👕 BRAND NEW Engine Heart T-shirt mightycarmods.com/collections...
🔔 Hit the bell next to Subscribe so you don't miss a video!

Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic if you are in any doubt.

komentāri
  • Did anyone see the haunted engine hoist roll behind the car when they were scoping the top end

    jammer2nz8h AJjammer2nz8h AJPirms 2 dienām
  • sooo, parted out?

    José Alejandro Mérida GonzálezJosé Alejandro Mérida GonzálezPirms 8 dienām
  • first i saw the can move in the turbo vid, now the cherry picker... you guys moving or just a running joke?

    mason kellermason kellerPirms 9 dienām
  • Should of put a Honda engine in it... would of made more power and been able to drive it home after

    JRRacefabJRRacefabPirms 11 dienām
  • Can an actual mechanic look at it??? 🤷‍♂️ moving a big end side to side tells you nothing.

    10GTE10GTEPirms 11 dienām
  • DON'T GO ROAD RACING WITH A STOCK OIL PAN. It has to be baffled to prevent oil starvation during hard cornering. That's what killed this engine.

    Freddy rosenbergFreddy rosenbergPirms 15 dienām
  • Does anyone know what happened to this cool project? Did they give up

    Nick HanlleyNick HanlleyPirms 15 dienām
  • A common issue with some toyota 1.8l engines on a road course causing oil starvation is the lack of a baffled oil pan. So on high G corners at high rpm the oil will slosh to the side and as such a lot of the oil that has gone to the head will a accumulate up top lowering the level in the pan. Top slosh and bottom slosh work together to expose the oil pick up to air. This will only happen a couple of times before you see the bearing spin and its downhill from there. The cheap turbo likely had little to do with it. To prevent this in my car it was necessary to install a baffled oil pan.

    3dw3dw3dw3dwPirms 18 dienām
  • "I need that turbo in mine ., Sir" 2012 Toyota Yaris Supa Car. Great video. did y'all upgraded the clutch.

    Leo XLLeo XLPirms 18 dienām
  • Why did the engine crane move wtf

    Mlg GamingMlg GamingPirms 18 dienām
  • bruh just buy new rods and pistons that are forged and not shitty oem ones

    Mashu HaraguniMashu HaraguniPirms 20 dienām
  • Boys i just bought a Yaris...2006 1.5vvti lol..shes manual tho! Actually goes bloody well and only had 127km! Needs a turbo

    Compeer RaaCompeer RaaPirms 21 dienas
  • 5:30 😂

    Mickey J MTBMickey J MTBPirms 21 dienas
  • sounds like my experience of track racing ..

    Making Stuff AwesomeMaking Stuff AwesomePirms 22 dienām
  • Y’all the ghost thing is a running joke

    SadFlexSadFlexPirms 25 dienām
  • i miss this car. i hope you guys resurrect it in a future build series.

    Swarl-OSwarl-OPirms 26 dienām
  • Those Lego men...so annoying.

    Rob DixsonRob DixsonPirms Mēneša
  • make a turbo engine without low engine's compression ratio is the result that you'll expect

    labakis1labakis1Pirms Mēneša
  • Rebuild the motor it’s cool

    Henrik AdmanHenrik AdmanPirms Mēneša
  • You have a ghosts in a shop. 5:55 trolley at the back moves.

    Michał StankiewiczMichał StankiewiczPirms Mēneša
  • if it had meth injection it might have survive the boost it was taking

    boost junkieboost junkiePirms Mēneša
  • You guys. Thank you for this. I have the exact same motor 2ZR-FE in a matrix. And was thinking of building it for boosted fun for weekend track days. But this thing happened in the past not boosted ... my 2nd motor. So nvm I won’t build this engine anymore lol

    Elmer UreñaElmer UreñaPirms Mēneša
  • We do have Ryobi bendi-lights in the U.S. they're wonderful to have.

    iansrvingiansrvingPirms 2 Mēnešiem
  • At this point I'm convinced that shop is either 100% haunted or they are playing some dude to go move that shit around 🤣

    KDJ TrojakKDJ TrojakPirms 2 Mēnešiem
  • Good ole Ryobi. We get the light. Just gotta order from the depot.

    Eric MooreEric MoorePirms 2 Mēnešiem
  • Your guys shop is haunted.

    David HealdDavid HealdPirms 2 Mēnešiem
  • Celica GT engine with the turbo kit.

    Amit SinghAmit SinghPirms 3 Mēnešiem
  • Yes,we get those Ryobi lights in Canada.

    Amit SinghAmit SinghPirms 3 Mēnešiem
  • Suspension upgrade would've shaved a few seconds off that lap time.

    Amit SinghAmit SinghPirms 3 Mēnešiem
  • подачу масла на турбину надо было жиклёром ограничивать

    zaebamaramazaebamaramaPirms 3 Mēnešiem
  • Definitely wouldn't push more than 7 psi on stock internals imo

    Robert LopezRobert LopezPirms 3 Mēnešiem
  • 5:54 the jack heist moves on its own

    Natie MullerNatie MullerPirms 3 Mēnešiem
  • Build it!!!

    jeff smithjeff smithPirms 3 Mēnešiem
  • The ghost was ready to pull the engine 🤣😅

    Sebastian VargasSebastian VargasPirms 3 Mēnešiem
  • You have a ghost in your video at 6:00mins look behind the car

    Jayjucker expeditionJayjucker expeditionPirms 3 Mēnešiem
  • Keep it! :D I love the "yaris hilton" series! :)

    FreakkyJackFreakkyJackPirms 3 Mēnešiem
  • Boys why is you engine crane moving by its self lmao. Look from 6:5 on the clip and you will see very spooky.

    Adrian CaruanaAdrian CaruanaPirms 3 Mēnešiem
  • 3:16 Marty using the windshield wiper as a hood prop xD

    Joshua MillerJoshua MillerPirms 3 Mēnešiem
  • Since you are wanting to go crazy fast in Yaris Hilton. How about dropping a three rotor rotary engine in it?

    Marvin CrossMarvin CrossPirms 3 Mēnešiem
  • Forged rods and forged pistons make it a top this way u won't have to worry about the turbo making to much power

    cameron Gcameron GPirms 3 Mēnešiem
  • Rebuild it with forged rods

    cameron Gcameron GPirms 3 Mēnešiem
  • My guess, ring gap, broken ring landing on piston......lets see After watching: spun rod bearing, would have been my 2nd guess. Still would like to see the pistons. Adding ring gap is very important when doubling engine power, plus running it on a track, the contant increased cylinder temps will make a stock gapped ring grow and when the ring lands touch, game over.

    The-WiggThe-WiggPirms 3 Mēnešiem
  • Nah, ye stepped on the hoses and pulled it down. That board thing, though...

    2012listo2012listoPirms 3 Mēnešiem
  • Next episode: tesla swapped yaris

    ExperienceTeslaExperienceTeslaPirms 3 Mēnešiem
  • Wait, I missed her meeting her end?

    Darren-Edward OneillDarren-Edward OneillPirms 3 Mēnešiem
  • Anybody notice the motor lift

    gizmofotogizmofotoPirms 3 Mēnešiem
  • Oil starvation from hard cornering. The old Ford 3.0 lit v6 Essex Engine had the same problem and would do the crank in. Deeper baffled sump is the only cure. Marty looks like my eldest Son that lives 300 miles away now and is a Mechanic. You had a lot of hassle geting that Turbo in. Theres a vid from a few years ago that was on youtube of a guy doing a big engine swop. He put an LS 1 V8 into a small car and there was no room left under the bonnet. He did a very odd thing he put an aluminium raceing fuel tank in the boot. Dropped the old tank out that was under the car around the back seat area. He mounted a big Turbo under the car where the old fuel tank was because of the length of the pipes to the intercooler the air was super cool at the Manifold. I had never heard of rear mounting a Turbo before but it worked well getting 17 psi at the manifold. The LS1 5.7 Lit is very powerful but the Turbo made it awesome.

    RUSSELL KERFOOTRUSSELL KERFOOTPirms 3 Mēnešiem
  • i,d like to see the boyz build a fast honda element . at least it hauls parts

    boomerboomerPirms 3 Mēnešiem
  • Did that cherry picker moved on its own?

    John Alvin GonzalesJohn Alvin GonzalesPirms 3 Mēnešiem
  • Just grab another yard engine, do it right and pull the pistons and gap the rings for boost, then you should be good for what you're running.

    Kevin BrockKevin BrockPirms 3 Mēnešiem
  • Donate that haltech to me🥺

    mat denmat denPirms 3 Mēnešiem
  • I love watching this swap. I just to comment to say, "There was too much page up!" Lol (in reference to the tuner pushing page up while pushing for more power for the other that didn't watch the previous episode.)

    kraash kkraash kPirms 3 Mēnešiem
  • Mid engine swap it

    David RussellDavid RussellPirms 4 Mēnešiem
  • 1jz swap

    KristianVonRandomKristianVonRandomPirms 4 Mēnešiem
  • well time for an ls swap

    Clyde D.Clyde D.Pirms 4 Mēnešiem
  • put some good rods, pistons and bearings in it and terrorize the local car scene.

    Darryl KimbleDarryl KimblePirms 4 Mēnešiem
  • R32 drivetrain and engine HILTON!

    Scrapyard ComputingScrapyard ComputingPirms 4 Mēnešiem
  • you guys need to dress up like the ghost busters and get rid of your garage spook infestation, it's bad when even the engine hoist on the background starts to move, your dealing with a level 3 slime spuwer😂😂😂🤟✌️👉

    Greasemonkey2k4Greasemonkey2k4Pirms 4 Mēnešiem
  • Yaris Hilton, much like Paris Hilton blew a rod on camera!

    Alex CaballeroAlex CaballeroPirms 4 Mēnešiem
  • The thing with turbo is it's not consistent, cylinder pressure/temps will rise as you drive it, you probably had some detonation from a hot spot over boost. With stock components it's very dangerous to go above 5 psi, they just can't handle anything.

    Nathan SquireNathan SquirePirms 4 Mēnešiem
  • 4:13 It happened again What's different from before is because of your foot now, mate. XD

    Alvino LexyAlvino LexyPirms 4 Mēnešiem
  • Who are the knobs that put a thumbs down ? You knobs !

    Uncle ReekoUncle ReekoPirms 4 Mēnešiem
  • Everyone's on about the engine crane but something moves in the background of every video. And if you're reading this, I'm ready to claim my prize for naming them all.

    Shut Up And PickShut Up And PickPirms 4 Mēnešiem
  • This clearly calls for a good Balls Scope and one night in Yaris 🧐 ...

    John DoeJohn DoePirms 4 Mēnešiem
  • Haunted garage with a ghost mechanic waahhhh

    RicDenAed CarpioRicDenAed CarpioPirms 4 Mēnešiem
  • If your shocks are good, go springs. If not and you want a nice street ride get Koni yellows or whatever shocks and do research for streetable springs that give you the lowered look If you're hitting the track moreso, obviously you know you choice lol.

    Azz _Azz _Pirms 4 Mēnešiem
  • What broke on the engine?

    Marvin BuchmannMarvin BuchmannPirms 5 Mēnešiem
  • Rebuild it bigger boost hahahah

    Seth BooneySeth BooneyPirms 5 Mēnešiem
  • Why not put a celica tsport engine in it is faster from te factory and because this engine fits that wil to

    Rick van der wijstRick van der wijstPirms 5 Mēnešiem
  • Why your engine crane move by itself???

    Herry X GamersHerry X GamersPirms 5 Mēnešiem
  • 5:33 ... Oh wow, semen 😂😂😂

    Sukh S.Sukh S.Pirms 5 Mēnešiem
  • 5:55 what is happening behind there...

    Lim Ri BingLim Ri BingPirms 5 Mēnešiem
  • We get the lights in Canada

    Brandon LalondeBrandon LalondePirms 5 Mēnešiem
  • Ongoing gag with the falling objects and randomly rolling equipment cracks me up....

    VanadeoVanadeoPirms 6 Mēnešiem
  • www.todaysunshine.com/

    Matthew RidgewayMatthew RidgewayPirms 6 Mēnešiem
  • That garage is definitely haunted

    Arnulfo DelcompareArnulfo DelcomparePirms 6 Mēnešiem
  • That engine crane at like 6:00 scared the shit out of me not cool guys 🤣

    Jack HanlonJack HanlonPirms 6 Mēnešiem
  • 5:59 I'm pretty sure by now this garage is haunted

    AmieSportsAmieSportsPirms 6 Mēnešiem
  • A just saw the motor jack move and got scared and started laughing at the same time...

    Miguel FigueroaMiguel FigueroaPirms 6 Mēnešiem
  • @ 6:00 😶 ghost alarm ! 🤔 😂

    Ben FeatherstoneBen FeatherstonePirms 6 Mēnešiem
  • Something going on in the background there

    Joseph SamuelJoseph SamuelPirms 6 Mēnešiem
  • Put the legendary 2zz

    Med BukenyaMed BukenyaPirms 6 Mēnešiem
  • Each of their videos includes some kind of object falling down in their garage but in this video it started moving im sure pretty sure that in next videos they will start flyinv

    rana alirana aliPirms 6 Mēnešiem
  • 2jz swap

    •Finn••Finn•Pirms 6 Mēnešiem
  • Should have left it at 88kw

    jesse petrellajesse petrellaPirms 7 Mēnešiem
  • I want that work light and that portalift

    Larry DLarry DPirms 7 Mēnešiem
  • Boys!!! Turn it into a ute.... and call it the yute 😂😂😂😂👌

    Corza 04Corza 04Pirms 7 Mēnešiem
  • 5:56 yo I think your house is haunted, that engine lift moved by it’s self

    BEA5T379 gamingBEA5T379 gamingPirms 7 Mēnešiem
  • We gon ignore the fact that moog got a damn caboose on him?? Hes thhiiccccccc

    AmericanNukeAmericanNukePirms 7 Mēnešiem
  • You need to think about this. Your putting out nearly three times the power of the regular engine. If you want to a reliable engine, quite a few things in the engine will need to be replaced with high performance/race bits. Bearings will need to be high grade, maybe need to replace the whole of the crankshaft, engine block, pistons, connecting rods, rings, valves etc. Every time you rebuild that engine with stock parts, something that was not designed to take the amount of force being generated will fail.

    Jason KingJason KingPirms 7 Mēnešiem
  • Un fantasma movio el gato de motores 🤣😂😂

    Luis FernandezLuis FernandezPirms 7 Mēnešiem
  • hehehe @ Tree Fiddy plate on the wall. Obv. stolen off the Loch Ness monster.

    Pet LeonardPet LeonardPirms 7 Mēnešiem
  • All these things moving from a "ghost" is probably adding up to them finally saying they are moving. Marty said he doesn't know if he can work in there anymore. They also said previously that they can't install a lift because they can't drill into the ground there. So they are moving just to be able to have a lift.... Watch. Lol

    Christopher GrimmChristopher GrimmPirms 7 Mēnešiem
  • 6:55 No matter where you are in the world we all have that exact same jack haha. Edit : Not one minute after I pause to comment this Moog asks if we have the Ryobi light in America. Yes we have them and yes I need one, I'm always using my phone and that's how I broke my last phone when I left it under the hood and closed the hood on it.

    Justin CouchJustin CouchPirms 7 Mēnešiem
  • Haunted shop huh guys? fun fun, see that engine hoist slide accross the floor?

    Rod RissanenRod RissanenPirms 7 Mēnešiem
  • Please get the oil out of the turbo cause it has metal and it can get damaged

    The white beastThe white beastPirms 7 Mēnešiem
  • Hayabusa engine swap!

    Jules bellinger-brownJules bellinger-brownPirms 7 Mēnešiem
  • Fix it up and i'll buy it. Give yah a thou cash.

    bigmandarrbigmandarrPirms 7 Mēnešiem
  • New motor, lower boost, let her live.

    William PetersonWilliam PetersonPirms 7 Mēnešiem
  • Since it's had glitter run through it, it's got to come out. Forged pistons at the minimum, rods if you have the budget. MLS head gasket, and get the compression ratio down a couple points, and turn the boost up. Clutch will be a failure point. Keep it that way.. Then stay off the track, and you'll have a super fun street car.

    Mike DMike DPirms 7 Mēnešiem
LVworld